Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Sunnyvale Owner’s Guide
Rowan Construction Group Sunnyvale stocks and installs Cambria-compatible surfaces for home additions and ADU projects, with typical installed pricing from $45,000 to $130,000 for additions and $90,000 to $220,000 for detached ADUs. Most Sunnyvale homeowners discover their Cambria surface needs attention when hairline cracks appear near sink cutouts, or when the seam between slab sections begins to lift in the temperature swings between our dry Santa Clara Valley summers and the cooler months. We carry sample boards and templating materials on every addition and ADU quote visit in Sunnyvale.
Which Cambria Models This Applies To
Cambria’s quartz surfaces are not sold by traditional “model” numbers. Instead, they are organized into design collections - Brittanicca, Waterstone, and the newer Matte finishes - each with specific slab dimensions and thicknesses that dictate how they integrate into addition and ADU cabinetry. For a Sunnyvale kitchenette in an ADU above a garage, you’ll typically see either the standard 2-centimeter slab or the 3-centimeter option used when the design calls for a built-up edge without a laminated profile.
To identify what you have, check the underside of any removable countertop section near a cooktop or sink cutout. Cambria stamps a batch code and color name in ink that survives installation. If that label is gone, measure thickness precisely: 2cm measures 0.75 inches, 3cm measures 1.25 inches. The 3cm stock is heavier and requires cabinet boxes rated for the load, which is a common compatibility gotcha when homeowners retrofit standard IKEA or big-box cabinets into an ADU without upgrading the substrate.
We source Cambria through authorized distributors in the Bay Area. For budget-conscious ADU projects in Sunnyvale, we also quote Silestone and Caesarstone equivalents with comparable Mohs hardness ratings, though Cambria’s non-porous resin formulation remains our default recommendation for rental units where tenant turnover accelerates wear.
Signs Your Cambria Home Additions & ADU Is Failing

- Visible seam separation at the sink or cooktop cutout. Cambria expands and contracts with temperature shifts, and the silicone joint compound degrades after 7-10 years in Sunnyvale’s climate. The gap traps moisture against the plywood substrate, which swells and pushes the seam further apart.
- Dull or etched patches that don’t respond to polishing. Cambria is 93% quartz and resists most acids, but prolonged exposure to alkaline cleaners or abrasive pads breaks down the resin binder. The patch feels rougher than the surrounding surface when you run a fingernail across it.
- Hairline cracks radiating from corners. These almost always trace back to inadequate support underneath - either a span too wide between cabinet walls, or a dishwasher cavity framed without a proper front rail. The slab flexes microscopically with daily use until the resin matrix fatigues.
- Discoloration near windows with western exposure. Cambria warranties against UV fading, but in practice we’ve seen subtle yellowing on older Brittanicca installations in Sunnyvale’s Lakewood Village neighborhood where afternoon sun hits directly through single-pane glass. The resin UV stabilizers degrade faster than the quartz content.
- Water pooling at the backsplash junction. The caulk bead fails first, but if water has been migrating behind the slab for months, the adhesive bond to the substrate weakens. You’ll feel a slight give if you press firmly near the wall.
Before
AfterReplacement Cost & What’s Included
For a Sunnyvale home addition or ADU project involving Cambria surfaces, our installed pricing breaks down as follows:
| Component | Price Range |
|---|---|
| Cambria slab (material only, per square foot) | $75-$125 |
| Fabrication, templating, and edge profiling | $40-$65 per sq ft |
| Removal and disposal of existing surface | $800-$1,500 |
| Sink/cooktop cutout and faucet drilling | $200-$400 per opening |
| Full addition or ADU project (total, including cabinetry) | $45,000-$130,000 |
| Detached ADU construction (total) | $90,000-$220,000 |
What drives the range: slab color (Brittanicca Gold commands premium pricing), edge detail complexity, and whether the existing cabinet boxes need reinforcement or replacement. Under Clause 1 of the Haven Standard, we deliver a written line-item quote before any contract is signed - material costs, labor hours, and any subcontractor scope listed separately. Our 365-Day Done Right Promise covers installation defects, and every visit includes a documented photo record as standard.
DIY or Call Us?

There’s a clear line here. A homeowner can safely inspect for the symptoms above, photograph seam gaps for our review, and verify cabinet support by removing a drawer and sighting along the front rail. What you cannot do safely is remove a full Cambria slab without risking both personal injury and structural damage.
A 3cm Cambria slab runs 20-25 pounds per square foot. A typical ADU kitchenette counter measures 16-20 square feet. That’s 320-500 pounds of brittle material, often bonded with silicone and mechanical fasteners you can’t see until you’re committed. We’ve been called to Sunnyvale jobs where a homeowner cracked the slab during removal, then discovered the substrate was mold-compromised - turning a surface replacement into a full cabinet rebuild. Measure it twice, write it down, then build it. Call (650) 405-3637 and we’ll templating the replacement with the existing cabinets in place, no demolition guesswork required.
FAQs
With proper installation and routine care, Cambria surfaces last 20-30 years in Sunnyvale’s climate. The limiting factor is usually the silicone joint compound at seams and cutouts, which we recommend inspecting every 5-7 years. Call (650) 405-3637 for an exact quote on replacement - estimates are free.
Minor chips at edges can be filled with color-matched epoxy, but cracks through the body, seam separation, or substrate damage require full replacement. The resin binder does not accept structural repair the way natural stone can be patched. Call (650) 405-3637 for an exact quote - estimates are free.
Templating takes 2-3 hours on-site. Fabrication runs 10-14 business days through our Bay Area distributor. Installation is one day for a standard kitchenette, two days if we are reinforcing or replacing cabinet substrate. Call (650) 405-3637 for an exact quote - estimates are free.
We stock sample boards and templating materials on every truck. Slabs are held at our distributor in San Jose and cut to template - we do not warehouse full slabs due to the color variation between batches. Most Sunnyvale projects move from signed contract to installation in 3-4 weeks. Call (650) 405-3637 for an exact quote - estimates are free.
Rowan Construction Group Sunnyvale is an independent service provider and is not affiliated with Cambria. We also stock and install surfaces from KraftMaid, Silestone, and Kohler product lines.
Ready to price your addition or ADU project? Call (650) 405-3637 to schedule your free estimate. You’ll receive a written line-item quote with material costs, labor hours, and subcontractor scope listed separately - before any work starts, every time, on every trade.
Written by Grant Rowan, Owner, Rowan Construction Group Sunnyvale at Rowan Construction Group Sunnyvale, serving Sunnyvale and nearby areas.







Before
After
Before
After
Before
After