PGT Kitchen Remodeling Nationwide

PGT Kitchen Remodeling: The Sunnyvale Owner’s Guide

PGT kitchen remodeling in Sunnyvale typically runs $14,000-$45,000 for a full project, with cabinet installation, countertop replacement, and backsplash work quoted separately so you see where each dollar lands. We stock PGT-compatible cabinet hardware, drawer systems, and soft-close hinge sets on our Sunnyvale trucks, and most part replacements can be scheduled within 48 hours. Most owners discover a PGT component is failing when drawers begin sticking, cabinet faces sag, or soft-close mechanisms stop engaging before the door reaches the frame.

Call (650) 405-3637

Which PGT Models This Applies To

PGT’s kitchen product line spans three series: the Classic Series (pre-2018, face-frame construction with 3/4-inch plywood box), the Pro Series (2018-2023, frameless European-style with 5/8-inch melamine), and the current Haven Series (2023-present, hybrid frame with integrated soft-close). The part you need depends on which series is installed in your Sunnyvale home. Classic Series drawer glides mount with a 32mm hole pattern and use a side-mount bracket; Pro and Haven shifted to undermount slides with clip-in rear brackets that are not backward-compatible.

To identify your series, check the hinge cup bore: Classic uses a 35mm cup with two adjustment screws, Pro adds a third screw for depth adjustment, and Haven uses a tool-free click-in mount. The model sticker, when intact, sits on the cabinet interior wall near the hinge side; if it’s missing, measure the wall thickness. Classic boxes measure 3/4 inch, Pro and Haven measure 5/8 inch. We carry OEM PGT hardware and quality aftermarket equivalents from Blum and Grass; for discontinued Classic components, we machine adapter plates in-house rather than forcing a full cabinet replacement.

Signs Your PGT Kitchen Remodeling Is Failing

• Drawers stick or require a tug to open. The roller bearing in the slide mechanism has worn flat, or the slide rail has bent from overloaded pots and pans. In Sunnyvale’s older Lakewood Village homes, we see this when original Classic glides reach 15-20 years of use.
• Cabinet doors no longer soft-close; they slam shut. The hydraulic damper cartridge inside the hinge has leaked its silicone fluid, usually from temperature cycling in kitchens with west-facing windows. The hinge body is often fine; only the cartridge needs swapping.
• Door faces sit crooked or rub the frame. The hinge mounting plate has stripped its screw holes in the particleboard, or the three-way adjustment has drifted beyond its range. This is common in Pro Series units where the 5/8-inch box provides less bite for the screws.
• Pull-out shelves drop or tilt when extended. The rear bracket of the undermount slide has cracked or the locking clip has fatigued. PGT’s Pro Series used a nylon clip in 2019-2021 production runs that degrades faster in high-humidity kitchens near dishwashers.
• Lazy Susan or corner unit binds or skips. The polymer bearing ring has flattened from weight, or the pole has bowed. We replace these with metal-bearing upgrades that carry 75 pounds more than the OEM spec.

Before

After

Replacement Cost & What’s Included

For Sunnyvale PGT kitchen part replacement, we quote by the component, not by mystery:

What drives the range: slide length (18-inch vs. 30-inch), whether the cabinet box needs reinforcement where screws have stripped, and access difficulty in tight corner cabinets. Every quote is a flat written price with parts, labor, and any necessary box repair listed separately. Under Clause 1 of The Haven Standard, that written price is delivered before any work starts. Our 365-Day Done Right Promise covers the installation and the part; if the soft-close fails or the slide binds, we return and make it right.

DIY or Call Us?

There’s safe checking, and then there’s the point where a kitchen cabinet’s structural integrity is at stake.

What you can safely do: confirm the series by measuring wall thickness and checking the hinge cup pattern. Tighten any loose adjustment screws with a Phillips head. Remove a drawer and inspect the slide for visible bending or roller damage. These steps cost nothing and tell us exactly what to bring.

Where DIY goes wrong: drilling new holes in a 5/8-inch melamine box without a depth stop blows through the wall into the adjacent cabinet. Forcing a Pro Series slide into Classic mounting holes strips the particleboard and turns a $200 repair into a $900 cabinet replacement. The nylon clips on 2019-2021 Pro slides snap under hand pressure if removed cold; they need a specific release angle. We carry the release tools and the replacement clips on every Sunnyvale truck. Call (650) 405-3637 and we’ll schedule a free estimate, measure it twice, write it down, then build it.

FAQs