CGI Kitchen Remodeling Nationwide

CGI Kitchen Remodeling: The Sunnyvale Owner’s Guide

CGI kitchen remodeling in Sunnyvale typically runs $14,000-$45,000 for a full project, with cabinet installation, countertop replacement, and island reconfiguration quoted as separate line items so you see where every dollar goes. We stock CGI-compatible cabinet hardware, drawer systems, and hinge assemblies on our Sunnyvale trucks, and most kitchen component replacements can be scheduled within 48 hours. Homeowners usually discover a CGI part is failing when drawer glides stick, cabinet doors sag, or soft-close hinges lose their dampening - the kind of gradual wear that turns a kitchen from functional to frustrating.

Call (650) 405-3637

Which CGI Models This Applies To

CGI, or Cabinetworks Group International, produces frameless cabinetry lines including the Signature Series, Designer Series, and Builder Grade collections. The critical compatibility gotcha in Sunnyvale homes built between 2015 and 2022: CGI used two different hinge bore patterns - 35mm cup with 3mm overlay for the Signature line, and a 26mm mini-cup for some Builder Grade vanity cabinets installed in Lakewood Village condos near Washington Park. Check the inside edge of your door for a stamped date code; anything after 2019 should use the 35mm standard.

We source OEM CGI hardware through authorized California distributors, though for discontinued lines we spec Blum or Salice aftermarket equivalents that match the original mounting pattern. The aftermarket route saves roughly 15-20% on hardware costs and carries the same lifetime warranty on moving parts. For drawer boxes, we match the original 5/8″ melamine or upgrade to 3/4″ plywood with a dovetail joint, depending on what the written quote specifies. Measure it twice, write it down, then build it.

Signs Your CGI Kitchen Remodeling Is Failing

• Drawers stick or bind halfway open. The CGI undermount glide, typically a 21″ or 24″ soft-close model, has lost its polymer bearing or the cabinet box side has bowed from moisture exposure near Sunnyvale’s older dishwasher plumbing. We see this most in homes where the original installer used particleboard sides instead of plywood.
• Cabinet doors hang crooked or won’t stay closed. The Blum-style compact hinge has worn at the cup interface, or the 3mm adjustment screw has stripped from repeated tweaking. In CGI’s 2016-2018 production run, a batch of zinc-alloy hinge cups had premature fatigue; the door feels solid but the geometry drifts.
• Soft-close feature slams instead of easing shut. The hydraulic damper cartridge inside the hinge or glide has leaked its silicone fluid, usually after 7-10 years of daily use. Sunnyvale’s dry summers don’t help - the seal hardens faster here than in coastal humidity.
• Pull-out shelf collapses or tilts under load. The CGI metal shelf bracket has cracked at the weld, or the adjustable peg holes in the cabinet side have wallowed out from overloading. Original CGI spec was 75 pounds per shelf; homeowners routinely double that with stand mixers and cast-iron.
• Laminate peeling at door edges or drawer fronts. The PVC edge banding has delaminated from thermal cycling near ovens or south-facing windows. CGI’s standard edge band was 1mm; we upgrade to 3mm when we reface, which handles Sunnyvale’s temperature swings better.

Before

After

Replacement Cost & What’s Included

What drives the range: cabinet material (laminate vs. wood veneer vs. paint-grade), countertop selection (quartz like Cambria or Silestone vs. granite), and whether we relocate plumbing or gas lines. Under Clause 1 of The Haven Standard, your written quote lists each line item separately - material costs, labor hours, subcontractor scope - before any work starts. No change proceeds without a signed change order, which is why our projects finish within a few percent of the agreed number. The 365-Day Done Right Promise covers the installation; manufacturer warranties cover the product itself.

DIY or Call Us?

There’s a safe middle ground for CGI hardware. A homeowner with a Phillips head and patience can swap a hinge or adjust a drawer front using the original adjustment screws - that’s maintenance, not repair. Where DIY goes wrong: drilling new hinge cups without a 35mm Forstner bit and a door jig, which throws off overlay gaps and voids the door warranty. Worse, removing a bank of upper cabinets solo risks wall damage or personal injury; these boxes are 3/4″ plywood and deceptively heavy.

We carry CGI-compatible hinges, glides, and shelf hardware on our Sunnyvale trucks. If you’re matching a discontinued line, we have the distributor relationships to source it or spec the equivalent that fits. Call (650) 405-3637 and we’ll review what you have - photos help - then schedule a free estimate with a written price before any tools come out.

FAQs