Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | Rowan Construction Group Sunnyvale
We provide independent Jerith service across Mountain View, from ornamental aluminum fence installation to railing repair and replacement on homes throughout the North Bayshore corridor and established neighborhoods east of El Camino Real. The one thing that makes our Jerith work here different: we account for Mountain View’s engineered bay-fill soils and marine-layer salt exposure in every footing depth and fastener spec, not after the fact. Call (650) 405-3637 to schedule your free estimate.
Why Mountain View Residents Choose Us for Jerith Service
We’ve installed and repaired Jerith ornamental aluminum fencing and railing systems across Mountain View since 2007, from Eichler post-and-beam lots in the Monta Loma neighborhood to newer two-story rebuilds near downtown. Our crew knows the difference between Jerith’s Ambassador extrusion profile and its Imperial series picket spacing without checking the catalog. We stock genuine Jerith replacement pickets, brackets, and gates for faster turnaround, and we carry coastal-rated stainless fasteners for the marine-layer side of your property where standard hardware corrodes inside three years.
Grant Rowan grew up in Beverly Hills and picked up his first framing hammer before he could drive. He trained in construction technology at Santa Monica College, where coursework covered structural load calculations and blueprint reading - fundamentals he still references when scoping a Jerith fence job on a regraded lot near the bay. For more than two decades Grant and our crew have worked across the Peninsula, including extensive Kitchen Remodeling - Mountain View and build-out work in neighborhoods with the same soil and climate conditions we see in Mountain View.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. Every Jerith project gets a flat written quote with material costs, labor hours, and any subcontractor scope listed separately. No work proceeds on a change until the change order is signed. That’s the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs.
Common Jerith Construction Problems We Solve in Mountain View

- Powder-coat chalking and fade on bay-facing exposures. The marine layer that rolls through North Bayshore and the Shoreline corridor most summer mornings carries salt that accelerates finish degradation on Jerith aluminum. We see this worst on west- and north-facing runs between Shoreline Boulevard and the bay, where the powder coat turns chalky and anodic-like pitting appears within four to six years. Our repair protocol includes touch-up coating with UV-stable marine-grade product and fastener replacement with 316 stainless.
- Bracket corrosion at post-to-panel connections. When Jerith aluminum panels are set in concrete footings that sit on compressible bay mud, seasonal moisture wicking and slight footing movement work moisture into the bracket cavity. The bracket itself is aluminum and won’t rust, but the original steel fasteners seize and swell, cracking the bracket ears. We replace with coastal-rated stainless hardware and add a drainage detail at the post base.
- Gate sag and latch misalignment. Jerith walk gates are precision-built to tight tolerances, but they’re only as plumb as their posts. On lots west of Highway 101 where engineered fill or expansive soils weren’t fully accounted for, we’ve seen original post footings settle two to three inches in five years. The gate drags, the latch misses, and the homeowner assumes the gate failed. Usually the gate is fine; the footing wasn’t deepened for the soil condition.
- Panel racking from tree-root heave and slab adjustment. Mountain View’s 1950s-60s ranch lots often have mature oak or liquidambar root systems that lift flatwork and fence lines together. Jerith panels rack when the post footing moves with the slab rather than being isolated below the root zone. We diagnose whether the panel can be re-racked or whether the post needs re-footing below the disturbance depth.
- Finish failure accelerated by salt-laden marine air. This is distinct from simple chalking: on properties within a half-mile of the bay, we’ve documented complete topcoat failure on Jerith Providence series residential fencing in under seven years, where inland Mountain View lots see fifteen-plus years of acceptable appearance. The difference is the salt load, not the product. We specify upgraded powder-coat spec or more frequent maintenance intervals for these exposures.
Before
AfterJerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Mountain View hosts Google’s global headquarters and its ongoing North Bayshore mega-campus redevelopment, making it one of the only small cities in the country where a single tenant drives a sustained wave of large-scale commercial and mixed-use construction that shapes contractor availability, permit-office workload, and subcontractor pricing across the entire local market. At the same time, residential lots in established neighborhoods command $1.5M-$2M+, making complete teardown-and-rebuild of 1950s-60s ranch homes economically routine here in a way that’s unusual even in adjacent Sunnyvale or Santa Clara, and many owners add Bathroom Remodeling in Mountain View as part of the process.
What this means specifically for Jerith owners: because Mountain View’s Community Development department reviews both Google’s North Bayshore mega-campus entitlements and routine residential permits through the same staff, plan-check queues for something as simple as a Jerith fence or railing permit can stretch during active entitlement phases. We build inspection and submittal timing into every Jerith project schedule instead of assuming a quick over-the-counter approval. On a 1950s ranch lot near Shoreline Boulevard in the North Bayshore area, we replaced a failing Jerith Ambassador aluminum fence run where the original posts had been set too shallow in engineered bay fill and were racking, popping brackets, and corroding at the bases. We pulled the old footings, dug and poured deeper concrete piers, reinstalled Jerith panels with coastal-rated stainless fasteners, and touched up the powder coat on the marine-layer side - the run has stayed plumb and rattle-free since.
Jerith Models & Products We Service in Mountain View

Our Jerith sales & service covers the full current lineup and most legacy installations in the Mountain View area:
- Jerith Ambassador series - ornamental aluminum fence with traditional pressed-spear picket; common on perimeter lots in the Monta Loma and Springer neighborhoods.
- Jerith Imperial series - heavier extrusion, tighter picket spacing; often specified for pool enclosures and rear-yard separation on rebuilt two-story homes.
- Jerith Providence series - residential-grade aluminum fence with flat-top rail; popular for front-yard visibility on Eichler lots where the fence needs to complement horizontal lines.
- Jerith Montage series - aluminum railing system for decks, balconies, and stair runs; we see increasing demand on second-story additions and ADU construction where code requires graspable rail.
We stock genuine Jerith replacement pickets, brackets, gates, and touch-up powder-coat for repairs, and use only quality aftermarket fasteners rated for exterior coastal exposure when OEM hardware is unavailable. For most single-panel or gate damage we recommend targeted repair, but when a run has multiple failed footings or widespread finish failure on a bay-facing exposure, full replacement is often the more economical long-term call.
Jerith Service Pricing in Mountain View
Our Mountain View service area pricing follows the same flat-written-quote protocol we use across all seven trades. For Jerith fence and railing work specifically:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000-$10,000 |
| Vinyl Fence Installation | $3,500-$9,000 |
What drives the cost: linear footage, number of gates, footing depth required for your soil condition (standard 24-inch depth versus 36-inch or deeper for bay-fill lots), and whether we’re matching existing Jerith powder-coat color or starting fresh. A free estimate includes a documented photo record of the existing condition, a written scope with line-item material and labor breakdown, and a fixed price with no change orders unless you sign one. Call (650) 405-3637 for an exact quote - estimates are free.
Serving Mountain View, CA - Our Local Coverage Area

We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Mountain View
Salt-laden marine air from summer morning fog accelerates powder-coat degradation on west- and north-facing exposures, particularly in the North Bayshore and Shoreline corridor. The chalking is surface oxidation of the finish layer, not the aluminum itself, and it’s repairable with proper cleaning and touch-up coating. Call (650) 405-3637 for an exact quote - estimates are free.
Yes - any fence over six feet or any railing system on a raised deck or balcony requires a permit through Mountain View Community Development. Because the same staff reviews both large commercial entitlements and residential permits, queue times vary; we build submittal timing into every project schedule and handle the application as part of our service.
Usually yes. We stock genuine Jerith replacement pickets and panels in common colors, and we can match most legacy powder-coat shades with factory touch-up product. If the existing run has faded significantly, we’ll show you the color difference under natural light before ordering so you can decide between repair and full-run refinishing.
Driveway slabs on Mountain View’s 1950s-60s ranch lots often settle or heave with root intrusion and seasonal soil movement, and fence posts set within the slab influence zone move with them. The fix is re-footing below the disturbed soil layer, not re-packing the existing hole. We diagnose the soil condition and specify depth on every post.
Yes, but the footing design changes. Regraded lots on engineered bay fill require deeper concrete piers or grade-beam connections to resist settlement and lateral load. We specify this in the written scope before work starts, not as a surprise add-on after the first post leans. Call (650) 405-3637 for an exact quote - estimates are free.
Service Areas Near Mountain View

We serve Mountain View and surrounding communities including Jerith service in Sunnyvale, Jerith service in Santa Clara, Los Altos, Cupertino, and Palo Alto. Soil conditions, permit processes, and marine exposure vary by city; we adjust our Jerith specs accordingly rather than applying a single template across the Peninsula.
Book Your Jerith Service in Mountain View Today
Call (650) 405-3637 to schedule your free estimate. We’ll send a uniformed technician with a documented photo record of your existing Jerith installation, a written line-item quote, and a schedule that accounts for Mountain View’s permit queue and your soil conditions. Measure it twice, write it down, then build it.
Written by Grant Rowan, Owner at Rowan Construction Group Sunnyvale, serving Mountain View since 2007.







Before
After
Before
After
Before
After