PGT Bathroom Remodeling Nationwide

PGT Bathroom Remodeling: The Sunnyvale Owner’s Guide

PGT bathroom remodeling in Sunnyvale typically runs $9,000-$28,000 for a full replacement, with most PGT shower door and enclosure projects falling in the $4,500-$12,000 range depending on glass thickness and hardware series. We stock PGT-compatible hardware and seals on our trucks, and most Sunnyvale homeowners get a written estimate the same day they call. The first sign of trouble is usually water pooling on the tile outside the enclosure, or a door that no longer latches square because the wall anchors have pulled free from the backer board.

Call (650) 405-3637

Which PGT Models This Applies To

PGT’s bathroom line breaks into three hardware families: the Classic Series (framed, 3/16″ glass, pre-2018), the Elegance Series (semi-frameless, 1/4″ glass, 2015-present), and the Spa Series (frameless, 3/8″ or 1/2″ glass, 2019-present). The wall jambs, sweep seals, and hinge pivot blocks are not cross-compatible between series, though the bottom sweep on a Classic 24″ door looks nearly identical to the Elegance version until you measure the T-slot width (Classic uses 5/16″, Elegance uses 3/8″).

To identify your series, check the etched PGT logo in the glass corner, then measure the glass thickness with a caliper or ruler. The model sticker on the hinge side jamb will list a code starting with CL-, EL-, or SP- followed by the nominal door width. We carry OEM PGT seals and sweeps, plus Selby and CRL aftermarket equivalents that match the original specs but cost 30-40% less. For frameless Spa Series jobs, we use only PGT OEM hinges; the aftermarket versions we’ve tested don’t hold the adjustment under the thermal cycling that Sunnyvale’s south-facing bathrooms see in summer.

Rowan Construction Group Sunnyvale is an independent service provider, not affiliated with PGT.

Signs Your PGT Bathroom Remodeling Is Failing

• Water leaking at the door bottom. The vinyl sweep has compressed or cracked, or the drip rail has pulled away from the glass. In Sunnyvale’s hard water, calcium buildup accelerates this; we see it most often in homes off Mathilda Avenue where the municipal supply runs 180-220 ppm hardness.
• Door drags or binds in the closed position. The hinge pivot block has worn oval, or the wall jamb has loosened from the substrate. PGT’s Classic Series used plastic pivot bushings that degrade in about 8-10 years with daily use.
• Glass panel shifting or rattling. The U-channel or clip system has lost tension, usually because the installer relied on silicone alone rather than mechanical fasteners into blocking. This is a code issue, not just an annoyance.
• Visible corrosion on framed door hardware. PGT’s pre-2016 Classic frames used a zinc alloy that pits when the protective coating is scratched. Once the substrate is exposed, the hardware won’t hold adjustment and replacement is the only fix.
• Sealant turning black or peeling at the wall joint. The silicone has reached end of life, or the original installer used acrylic caulk instead of 100% silicone. Moisture behind the jamb damages drywall and, in Lakewood Village homes with the original 1960s lath-and-plaster, can wick several feet before visible.

Before

After

Replacement Cost & What’s Included

The range depends on three things: glass thickness (3/16″ to 1/2″), whether we need to open the wall to install proper blocking (common in Sunnyvale’s 1950s-1970s tract homes where studs are 24″ on center), and if the existing tile surround requires repair after removal. Under Clause 1 of the Haven Standard, you get a written line-item price before any work starts - material costs, labor hours, and subcontractor scope listed separately. The 365-Day Done Right Promise covers the installation and hardware. Every visit includes a documented photo record, standard.

DIY or Call Us?

What you can safely check: verify the model code on the jamb sticker, inspect the sweep for visible cracks, and confirm the door latches square to the strike. If the sweep is cracked, the part is $12-$40 and swaps with a putty knife - just don’t force the T-slot or you’ll tear the channel.

Where DIY goes wrong: frameless door hinges carry 80-120 pounds of tempered glass on two or three pivot points. The adjustment is precise to 1/16″ for proper seal contact, and the mounting screws must bite into solid blocking, not drywall anchors. We’ve replaced three Spa Series panels in Sunnyvale this year where the homeowner stripped the hinge cups or cracked the glass during adjustment. Tempered glass cannot be cut or drilled after manufacture; crack it, and you’re buying a full new panel.

Call (650) 405-3637 for a free estimate. We’ll measure it twice, write it down, then build it.

FAQs